There are a lot of different parts that go into a roofing system. Each of them plays an important role, and most of them go unnoticed. Parts like the underlayment can’t even be seen, but it plays a vital part in keeping your house dry.
Chances are, you either don’t know what eaves are or you don’t appreciate them as much as you should. We’re going to talk about roof eaves and the important part they play in keeping your house dry and stable.
Nearly every house with a pitched roof will have eaves. Eaves are the part of the roof that hangs over the exterior wall. They typically have gutters on them to stop water from pouring off the roof.
Fun fact about house eaves: they’re what eavesdropping was originally referring to. Before gutters were made, water would fall from the eaves of the house. At first, the term referred to the drops of water that fell from the eaves. Then it referred to that general area as being a good place to listen in on conversations.
Eaves serve multiple purposes for your roofing system.
Homeowners should know as much as possible about their roofs. The more you know, the better you’ll be able to spot potential problems.
The fascia is the part of the roof that faces outward. It’s the edge of the roof where gutters are attached. Fascia is typically made with wood, vinyl, or aluminum. This board acts as a way to seal the roof. It protects the rafters and helps give the roof a finished look.
Wood fascia: it’s very common for fascia to be made with wood, but over time, homeowners will need to paint and seal at intervals throughout its lifespan.
Vinyl fascia is typically cheap, but needs to be replaced more often. Vinyl fascia is known to have great curb appeal and it can match your exterior siding and bring the whole house together.
Metal or metal-clad fascia lasts the longest, but it is the most expensive. In other words, you get what you pay for!
The soffits are installed on the underside of the eaves. Although they are not necessary, soffits can be a great place to add vents for your attic. They’re made out of aluminum or wood.
The 4 types of eaves are defined by what kind of soffit they have.
Roof maintenance is very important for keeping your roof operating well. The same goes for roof eave maintenance. If you want your whole roofing system to work in harmony, apply these maintenance options.
Soffits are not absolutely necessary, but they’re very helpful. They’ll keep pests out of your roof and, with soffit vents, they can help regulate temperatures in your house.
This is pretty straightforward — look at your eaves. It’s good to walk around your house from time to time and look for any areas that could have been damaged by weather or animals.
If a crack from a weather event or an animal is persistent enough, pests can make it into your attic. From there, who knows what kind of trouble they’ll get into.
Fascia boards and soffits are very exposed to the elements. To make sure they’re not on the verge of decay, make sure they’re painted and sealed from time to time. This will ensure these elements are well protected for the weather ahead.
Your eaves aren’t just overhangs. They serve as an important part of your roofing system. Not only are they what hold up your gutter system, but they could be the first line of defense against animals and the elements getting into your attic.
If you need any help with installing or maintaining your eaves, contact Legacy Roofing. You should also feel free for any questions you have about eaves. We are here to help.